Eaton Tripp Lite Series SmartPro 3000VA 3000W 120V Line-Interactive Sine Wave UPS

This rack-mount line-interactive UPS system provides reliable battery backup and AC power protection against blackouts, brownouts, surges and line noise that can damage your IT equipment or destroy data. The SMART3000RM2U is ideal power management for high-end in-rack networking equipment, including servers, VoIP phones, data storage and PoE switches. Unity power factor ensures the most watts possible at each power rating, so you can connect more equipment.

The field-replaceable, hot-swappable VRLA battery modules allow you to work through short power failures and give you enough time to safely save files and shut down your system in case of a prolonged blackout. Switchover from line to battery power happens within milliseconds to maintain continuous operation of connected equipment without interruption or rebooting.

The WEBCARDLXE network interface enables full remote configuration and management, including load shedding, reboots of connected equipment and safe shutdowns. The IP-based Auto Probe feature ensures continuous network uptime by communicating with other network devices, detecting lost connectivity and automatically rebooting IT equipment.

One L5-30R and six 5-20R managed outlets provide connected equipment with pure sine wave AC output and allow you to monitor power consumption down to the outlet group level. Power provided by these outlets is filtered to protect connected equipment against damaging surges and line noise. Four 5-20R outlets are split into two independently switchable load banks that let you shed non-critical loads to extend runtime for critical loads. Front and rear cooling fans help protect equipment from overheating.

AVR protects your equipment from incremental hardware damage, data loss and performance problems caused by brownouts. The SMART3000RM2U maintains regulated 120 V nominal output during brownouts and overvoltages from 80 V to 151V while keeping the battery fully charged and ready to take over in case of power failure.

This UPS system filters out disruptive electromagnetic and radio frequency interference that can inflict hardware damage or data loss. This EMI/RFI filtering also helps your connected components perform better and last longer.

The two-line front-panel LCD monitoring screen features 10 selectable screens that allow quick access to a wide range of detailed UPS and site power information. LEDs show UPS status: a green light means utility power is on, an orange light means the UPS is in battery mode and a red light indicates an active alarm or fault. The interface rotates to accommodate both rack-mount and tower configurations.

RS-232 and USB ports connect to a device for a variety of communication options. A dry-contact relay port can be programmed through the LCD to provide reliable communications to automation and industrial components. The RPO/ROO port permits emergency shutdown or remote restart of all connected equipment.

You can mount the SMART3000RM2U in just 2U of space in an EIA-standard 19-inch rack using the included hardware. You can also adapt it for tower installation using the included support stands. The 10-foot power cord with NEMA L5-30P plug connects to a compatible AC.

• Primary Information

  Product Description:	Eaton Tripp Lite Series SmartPro 3000VA 3000W 120V Line-Interactive Sine Wave UPS – 7 Outlets, Network Card Option, LCD, USB, DB9, 2U Rack/Tower Battery Backup – UPS – 3 kW – 3000 VA
  Device Type:	UPS – rack-mountable
  Rack Size:	19″ – 2U
  Weight:	74.52 lbs
  Input Voltage:	AC 120 V
  Output Voltage:	AC 120 V
  Power Capacity:	3 kW / 3000 VA
  Input Connectors:	1 x power NEMA 5-30
  Output connectors:	4 x power NEMA 5-15 ¦ 4 x power NEMA 5-15/20 ¦ 1 x power NEMA L5-30
  Battery Form Factor:	Plug-in module
  Run Time (Up To):	4 min at full load
  Color:	Black
  Dimensions (WxDxH):	17.5 in x 23.7 in x 3.5 in
  Manufacturer Warranty:	3-year warranty with product registration

• General

  Device Type:	UPS – rack-mountable
  Battery Enclosure Type:	Plug-in module
  Height (Rack Units):	2U
  Rack Size:	19″
  Color:	Black

• Power Device

  UPS Technology:	Line interactive
  Input Voltage:	AC 120 V
  Frequency Required:	60 Hz
  Input Connectors:	1 x power NEMA 5-30
  Power Output Connectors Details:	4 x power NEMA 5-15 ¦ 4 x power NEMA 5-15/20 ¦ 1 x power NEMA L5-30
  Output Voltage:	AC 120 V
  Power Capacity:	3 kW / 3000 VA
  Output Waveform:	Sinewave
  Surge Suppression:	Yes
  Surge Energy Rating:	480 Joules
  Circuit Protection:	Circuit breaker

• Battery

  Run Time (Up To):

  4 min at full load

• Expansion / Connectivity

  Interfaces:	1 x management (RS-232) – 9 pin D-Sub (DB-9) ¦ 1 x management (USB) – 4 pin USB Type B
  Expansion Slots:	1 (total) / 1 (free) x expansion slot

• Miscellaneous

  Rack Mounting Kit:	Included
  Equipment Protection Value:	250000 US Dollars
  Features:	Emergency power off, LED display, audible alarm, LCD display
  Compliant Standards:	FCC Class A certified, cUL, NOM, UL 1778

• Software / System Requirements

  Software Included:

  TrippLite PowerAlert

• Manufacturer Warranty

  Service & Support:

  Limited warranty – 3 years with product registration

• Environmental Parameters

  Min Operating Temperature:	32 °F
  Max Operating Temperature:	104 °F
  Humidity Range Operating:	0 – 95%

• Dimensions & Weight

  Width:	17.5 in
  Depth:	23.7 in
  Height:	3.5 in
  Weight:	74.52 lbs

• Special Feature

  COO:	TAIWAN
  TAA compliance:	Yes

• UNSPSC Code

  UNSPSC Code:

  39121011