Eaton Tripp Lite Series SmartPro 1950VA 1950W 120V Line-Interactive Sine Wave UPS

This rack-mount line-interactive UPS system provides reliable battery backup and AC power protection against blackouts, brownouts, surges and line noise that can damage your IT equipment or destroy data. The SMART2200RM2U is ideal power management for high-end in-rack networking equipment, including servers, VoIP phones, data storage and PoE switches. Unity power factor ensures the most watts possible at each power rating, so you can connect more equipment.

The field-replaceable, hot-swappable VRLA battery modules allow you to work through short power failures and give you enough time to safely save files and shut down your system in case of a prolonged blackout. Switchover from line to battery power happens within milliseconds to maintain continuous operation of connected equipment without interruption or rebooting. Extra runtime is available by connecting up to four optional extended battery modules (BP72VRM2U, sold separately).

The WEBCARDLXE network interface (sold separately) enables full remote configuration and management, including load shedding, reboots of connected equipment and safe shutdowns. The IP-based Auto Probe feature ensures continuous network uptime by communicating with other network devices, detecting lost connectivity and automatically rebooting IT equipment. Optional EnviroSense2 modules (E2MT, E2MTDO and E2MTHDI, all sold separately) provide a variety of environmental monitoring and control options.

One L5-20R and six 5-20R managed outlets provide connected equipment with pure sine wave AC output and allow you to monitor power consumption down to the outlet group level. Power provided by these outlets is filtered to protect connected equipment against damaging surges and line noise. Four 5-20R outlets are split into two independently switchable load banks that let you shed non-critical loads to extend runtime for critical loads. Front and rear cooling fans help protect equipment from overheating.

AVR protects your equipment from incremental hardware damage, data loss and performance problems caused by brownouts. The SMART2200RM2U maintains regulated 120 V nominal output during brownouts and overvoltages from 80 V to 151 V while keeping the battery fully charged and ready to take over in case of power failure.

This UPS system filters out disruptive electromagnetic and radio frequency interference that can inflict hardware damage or data loss. This EMI/RFI filtering also helps your connected components perform better and last longer.

By meeting strict U.S. Department of Energy and U.S. Environmental Protection Agency requirements, this ENERGY STAR 2.0 UPS system provides high operational efficiency to signal a reduction in BTU emissions, save on utility and cooling costs and help protect the environment.

The two-line front-panel LCD monitoring screen features ten selectable screens that allow quick access to a wide range of detailed UPS and site power information. LEDs show UPS status: a blue light means all is well, a blinking blue light means your attention is needed and a red light indicates a critical issue that demands immediate action. The interface rotates to accommodate both rack-mount and tower configurations.

RS-232 and USB ports connect to a device for a variety of communication options (cables are included).

• Primary Information

  Product Description:	Eaton Tripp Lite Series SmartPro 1950VA 1950W 120V Line-Interactive Sine Wave UPS – 7 Outlets, Extended Run, Network Card Option, LCD, USB, DB9, 2U Rack/Tower Battery Backup – UPS – 1950 Watt – 1950 VA
  Device Type:	UPS – rack-mountable
  Weight:	78.59 lbs
  Load Rating:	Large LAN / minicomputer
  Input Voltage:	AC 120 V
  Output Voltage:	AC 120 V ± 5%
  Power Capacity:	1950 Watt / 1950 VA
  Input Connectors:	1 x power NEMA 5-20
  Output connectors:	1 x power NEMA 5-15/20 ¦ 1 x power NEMA 5-15
  Run Time (Up To):	12 min at half load
  Networking:	RS-232, USB
  Color:	Black
  Dimensions (WxDxH):	24.3 in x 21.3 in x 8.9 in
  Manufacturer Warranty:	3-year warranty with product registration

• General

  Device Type:	UPS – rack-mountable
  Color:	Black

• Power Device

  Load Rating:	Large LAN / minicomputer
  Input Voltage:	AC 120 V
  Input Voltage Margin:	± 25%
  Frequency Required:	60 Hz
  Input Connectors:	1 x power NEMA 5-20
  Power Output Connectors Details:	1 x power NEMA 5-15/20 ¦ 1 x power NEMA 5-15
  Output Voltage:	AC 120 V ± 5%
  Power Capacity:	1950 Watt / 1950 VA
  Surge Suppression:	Yes
  Surge Energy Rating:	570 Joules

• Battery

  Run Time (Up To):

  12 min at half load

• Networking

  Remote Management Interface:

  RS-232, USB

• Expansion / Connectivity

  Interfaces:

  2 x management (RS-232) – 9 pin D-Sub (DB-9) ¦ 2 x management (USB) – 4 pin USB Type B

• Miscellaneous

  Features:

  LCD display, energy efficient

• Software / System Requirements

  Software Included:

  Drivers & Utilities

• Manufacturer Warranty

  Service & Support:

  Limited warranty – 3 years with product registration

• Dimensions & Weight

  Width:	24.3 in
  Depth:	21.3 in
  Height:	8.9 in
  Weight:	78.59 lbs

• Special Feature

  COO:	TAIWAN
  TAA compliance:	Yes

• UNSPSC Code

  UNSPSC Code:

  39121011